Now that the airband receiver is done (closed inside a box) I am a little bit out of ideas on what the next project should be....
Ok, I have some boards left during the development of the airband receiver, am thinking in the one that has the TDA1072, it gives a nice SW receiver.... one of the audio amps probably will also be used and as soon as the new Si570 kit arrives will be used for an VHF FM receiver with the MC3361 but them what... there are some boards almost ready for an HF transceiver and the "Speaky" ssb transceiver is waiting for the final touch.
I am opened to suggestions...
Homebrew of radio equipment, antennas, tuner, etc.
Sunday, October 18, 2009
Friday, October 16, 2009
The Airband receiver....at last!
...Not quite but enough!
Yes the Si570 kit returned from the "repair" (thank you Kees)... well it was more an operator issue than a repair, anyhow the thing works and I can finish now the airband receiver and move on to another project. After finishing the new squelch circuit (I changed from the TDA1072 to an TCA440 if) and put the boards in a box, I will consider this project done.
The receiver is not perfect but works to the minimum level I wanted, in the future probably will rebuild the input filter making it simpler.
The final circuit is similar to the ones I allready posted on previous articles so will not put again heres since I didn't draw it completly. Main features are:
Neosid coil rf filters.
BF981 rf preamplifier
NE602 mixer
Si570 VFO - kit from Kees, K5BCQ (can't get anything beter for the price)
TCA440 AM demodulator on 455Khz
LM386 (what else?) audio amplifier
CA3130 comparator for squelch circuit (shorting audio input via pnp transistor on act).
Sensitivity: enough
Audio power: enough
Here's the "beast" working, sory for the audio quality.
...there's a new Si570 VFO kit crossing the Atlantic.... but that is for another day...
Yes the Si570 kit returned from the "repair" (thank you Kees)... well it was more an operator issue than a repair, anyhow the thing works and I can finish now the airband receiver and move on to another project. After finishing the new squelch circuit (I changed from the TDA1072 to an TCA440 if) and put the boards in a box, I will consider this project done.
The receiver is not perfect but works to the minimum level I wanted, in the future probably will rebuild the input filter making it simpler.
The final circuit is similar to the ones I allready posted on previous articles so will not put again heres since I didn't draw it completly. Main features are:
Neosid coil rf filters.
BF981 rf preamplifier
NE602 mixer
Si570 VFO - kit from Kees, K5BCQ (can't get anything beter for the price)
TCA440 AM demodulator on 455Khz
LM386 (what else?) audio amplifier
CA3130 comparator for squelch circuit (shorting audio input via pnp transistor on act).
Sensitivity: enough
Audio power: enough
Here's the "beast" working, sory for the audio quality.
...there's a new Si570 VFO kit crossing the Atlantic.... but that is for another day...
Sunday, October 11, 2009
Multiple receivers on one antenna, some tests
Recently I came up with an interesting problem, I have more receivers (note: transceivers working as receivers) than antennas so I have sometimes to interchange antennas between them, wouldn't it be nice to split an antenna to several receivers.
Saw some interesting circuits in the internet but didn't tested any of them but I have some cable tv splitter's that would be nice for the job, here's the testing circuit:

Splitter is an "Teka" brand model 4302S/P-15 2-way tap 5-2400Mhz
Some problems with my testing:
1 - My signal source is not 75 Ohm
2- I didn't terminated all ports
3 - I don't have an rf voltmeter I can trust, only a simple rectifier probe connected to an DVM.
4 - I only tested at VHF
Anyhow I still didn't tested connecting to an receiver, probably some acceptable results could be found but I am sure only for high level signals.
One interesting part is that when connecting directly in the "power pass" output I have more output (on 145Mhz) than the signal generator directly connected to an dummy load....oh well that's the problem of not having accurate meters....
Some circuits that probably will work (for HF):
http://www.qrp.pops.net/swl-ant-split.asp
http://www.geocities.com/n2uhc_2/hfsplitter.html
will test them one of this days....
Saw some interesting circuits in the internet but didn't tested any of them but I have some cable tv splitter's that would be nice for the job, here's the testing circuit:
Splitter is an "Teka" brand model 4302S/P-15 2-way tap 5-2400Mhz
Some problems with my testing:
1 - My signal source is not 75 Ohm
2- I didn't terminated all ports
3 - I don't have an rf voltmeter I can trust, only a simple rectifier probe connected to an DVM.
4 - I only tested at VHF
Anyhow I still didn't tested connecting to an receiver, probably some acceptable results could be found but I am sure only for high level signals.
One interesting part is that when connecting directly in the "power pass" output I have more output (on 145Mhz) than the signal generator directly connected to an dummy load....oh well that's the problem of not having accurate meters....
Some circuits that probably will work (for HF):
http://www.qrp.pops.net/swl-ant-split.asp
http://www.geocities.com/n2uhc_2/hfsplitter.html
will test them one of this days....
Etiquetas:
Multiple receivers on one antenna,
some tests
Saturday, October 03, 2009
Goodie's from the UK
My good friend Per from Sweden, working in the UK, came for a visit to Portugal... ain't we in a global world?
He asked before if I needed something from the UK.... hum....no....hum...yes! A quick look in the website of an UK electronic shop and I remembered my enameled cooper wire was on the short side and that I can't get locally nice buttons, so here is what I got. Next time he fly's here I will ask for an lousy t-shirt!

Now I just have to get some free time to give this some nice use.
He asked before if I needed something from the UK.... hum....no....hum...yes! A quick look in the website of an UK electronic shop and I remembered my enameled cooper wire was on the short side and that I can't get locally nice buttons, so here is what I got. Next time he fly's here I will ask for an lousy t-shirt!
Now I just have to get some free time to give this some nice use.
Wednesday, September 30, 2009
External VFO controller for the FT-102
Had been without time so no updates were made on the last days but today I got some free time and on we go with the projects.
I decided to call this project an external vfo controller for the FT-102 since it doesn't mimics all the functions of the original external vfo but it is adaptable to any external vfo in the range 5-5.5Mhz with 130mV (or something like that) output powered by an 8v supply. Mine was an FV-107.
I did lost some time making this simple schematic just because when reading the FT-102 schematic I was seeing the ouput of a simple zener regulator as the imput making no sence to as the FT-102 controls the external vfo, in fact as soon as I placed the din plug on "ext vfo A" of the FT-102 it came to light. When you connect a plug in the external vfo A of the FT-102 he simple disconects the power supply from the internal vfo, ther's a connection so you can power it again. That's is how "control" is done. Ext vfo B it's just used to give indications on the mic buttons and internal reference oscilator case you use an pll.
Another issue that arrived is that the 12v present on the ext vfo plug aren't enough to power an hungry FV-107 with all the lights on ,so I just used the vfo part and not the christmas light's part, after all I just want ot make split's biger than 10Khz given by the internal vfo rit control. I still placed a capacitor to minimize power on current but it wasn't enougth, probably changing to an external power supply would solve this issue but wanted to keep it simple.
I think the "external vfo A" din plug on the FT-102 is not a standard one but you can "convince" a "normal" din to fitt there, assuming it has the same number of pins!
Here the schematic and the equipment working on an action video.
As soon as I found a cheap reduction drive and a nice capacitor will make an vfo smaller than the FV-107 so it can take less space and free it to another project.
By the way, I did this just to see if it was possible since my last QSO was more than an year ago, I gess I prefer to brew and no to chat.
Etiquetas:
External VFO controller for the FT-102
Thursday, September 17, 2009
FV-107 to FT-102 external vfo (FV-102)
One of the Yaesu FT-102 problems besides the relays is to get an FV-102, the external VFO, except this issues it's a nice radio at least better the ones I built...so far!. I dig around for a used FV-102 unit but the ones I found are too expensive for what I wanted to pay for legacy IC's in a box. I had two chances, to make an external VFO or to use an allready existing VFO from other radio. Since it's hard to make or to find good tunning capacitors with good reducion drive and dds/pll/etc is out of the question, to keep some signal purity, I went to the secound option; use an FV-107 as vfo for the FT-102.
The circuit is not finished yet so I will post the result when a repetible and clean assenbly is done. VFO interface and control is not completly linear in the FT-102 and with schematics on paper it took me some time to figure it out on what had to be done. See the video to see what is possible allready.
The circuit is not finished yet so I will post the result when a repetible and clean assenbly is done. VFO interface and control is not completly linear in the FT-102 and with schematics on paper it took me some time to figure it out on what had to be done. See the video to see what is possible allready.
Etiquetas:
FV-107 to FT-102 external VFO (FV-102)
Wednesday, September 09, 2009
PIC packet decoder
No big story here, at the same time I was looking for an APRS tracker found some schematic for an pic APRS decoder so why not build one also, I have no use for it at the moment since I make APRS on the TM-D700 but will probably incorporate it inside one of my vhf receivers or to take along on vacations.
I didn't compared side by side with the TM-D700 decoder but without optimization and using the ruber duck antenna inside house with the TH-F7 handie I think I got arround 20% of the packet's transmission. Probably with a good radio and some optimizasion the circuit will get 80% of it.
For testing I used Linux "minicom" software at 9600 8N1 without software or hardware flow (there's no flow, just receiving). The radio was with audio at mid volume seting.
Got the software from: http://www.ringolake.com/pic_proj/zcd/zcdmodem.html
Select "Simpler one chip ZCD decoder Both PC and GPS versions" (Simple decoder" button). Download de zip file, all the necessary files and schematic are there and also improvments for the circuit (I didn't do that).
For the pic programing I used the following command on a linux shell:
picprog --input-hexfile simpler_rx8.HEX --pic /dev/ttyS0 --burn
The pic programer hardware is at: http://speakyssb.blogspot.com/2009/08/pic-programing-for-aprs-tracker.html in this blog.
The PIC is an PIC16F628-04, I tried to use an 4Mhz ceramic filter as the oscillator but only the quartz crystal worked.
Subscribe to:
Posts (Atom)