Thursday, November 12, 2009

5-5.5Mhz VFO-Buffer.

Now that that the vfo looks nice and works nice....I must found a better variable capacitor, this one only has reduction of 1.5:1, the "rit" pot could help the lack of reduction on the capacitor but I want something nicer... so I will put the assembly on the "finished but no use for the moment" rack.
The output without load is around 1.9V measured with the homebrew rf test probe... ( http://speakyssb.blogspot.com/search/label/RF Probe )

The VFO buffer schematic













Drift from cold start:



Not bad hum? Considering the the box isn't closed and there are led's working as varicap's in the circuit.... also no capacitor was chosen for their thermal characteristics, only for their value.

There is some cw in the video background (this vfo was not connected to the radio), I was trying to copy the "no power transmitter" Atlantic crossing (http://soldersmoke.blogspot.com/2009/11/aa1tj-code-talker-on-maine-coast.html) but I guess this transmission was not them...

Saturday, November 07, 2009

5-5.5Mhz VFO


For my FT-102 I have been using the FT-107 VFO but it's like killing flies with a cannon since I make no QSO's at the moment and it could be used for the FT-107. After decided to use an homebrew vfo it's time to build one.
Transistor is a 2N3819 (no MPF102 in the "LES", local electronic shop). Variable capacitor is salvaged from an old radio and honestly I didn't measured it, also the capacitors of the tuned circuit were more or less dropped in the circuit til I have the 5-5.5 Mhz range. Toroid core is an T50-2, black and red with 30 turns and "middle" point at around 8 turns from ground. wire is 24 swg.
I reduced the power supply to 6v to try to improve on the stability. Since I didn't measured before I can't give you info if it did improve!
The "varicap" diodes are 2 red led's and give me around 10Khz offset in the highest vfo frequency (around 5.6Mhz). It tunes from around 4.9Mhz.
You can see in the video the initial drif. I hope that after placed in a box it will get betther. Anyhow made some tests after warming up (and the frequency counter removed) and it doesn't look that bad.



Not finished yet since I still need to put the buffer and find a nice box, will do that when needed.

UV916 tuner receiver based - Some tests

it's not complete but can't wait for it so made some tests, although not exactly very scientific but just to check if there is some signal on the output of the tuner.
I am not quite sure on what is the default frequency on the tuner since the programing part is not yet finished but since I get some signal (read: interference) out when there's some input it's a good sign.



Another video of what output looks like (actually sounds like) when I inject 88Mhz (I suspect it could be some harmonic here).



Wednesday, October 28, 2009

UV916 tuner receiver based (part 1) - Power supply


For the UV916 tuner one needs an 33v power supply. That's a small problem, my bench power supply only has 12v (more or less). Digging for an easy step up converter (read: search for what components were available locally) I found the MC34063 IC that my local electronic shop stocks as KA34063. After reading the datasheet I came up with a schematic.

Now it's a question of start dismantling some computer power supplies to find the 170 microH inductor since I don't feel like't to make one. I still don't have the IC so for the first time the schematic come first!
The local store doesn't stock the BYV10-40 diode but stocks the 1N5822, they look similar (10-20% values) in the datasheet so I will give it a try.
This is my first "switched" power supply so anything could hapen!!!

Adendum:
Replaced the 47K resistor by an of 33K and the 1850 ohm for an 1K2 in series with an 220ohm variable pot.
Diode was replaced by an 1N5819.
I did wind, after all, the toroid, it was salvaged (along with the output 200V!!! capacitor) from an old computer power supply and has 82 turns of 24swg wire on a yellow core... probably less turns would work also.
The 0.22 Ohm resistor was made winding around 40cm of wire.....It works.
Placed an 56k "bleed" resistor in parallel with the output to discharge the capacitor.
After following the data sheet on the MC34063 and making the schematic I found an online development aid for the IC at: http://www.nomad.ee/micros/mc34063a/index.shtml

Tuesday, October 27, 2009

UV916 tuner receiver based (part 0)

I was given some obsolete electronic equipment, namely some VHS video recorders.... I accepted thinking in using the boxes for some project.... but there's more than the box, a big collection of components including an UV916 tv tuner. Some time ago I came across some spectrun analizers and receivers using this tv tuners, now it's my time to test.

First thing to do is desoldering the most important components, I will not mind for now with resistors and capacitors, just the ones I could use on "rf", like the tuner some filters, cristals and inductors.

Now I have to look how things are connected:















And the TDA9813 match's in the datasheet from what I draw from the PCB circuit...VIF and CIF inputs I thing has something to do with bandwith beeing one of it mpeg4...














Here's another IC's used in other type of VCR's... looks like they are all almost the same...and the technology matches the components I removed....there's also two exits on the saw filter bellow...





























Now I am having the idea on how to connect everything.... The front end will be the tuner next the saw filter then an MC3361 based FM receiver from 30 to 40Mhz so I can fine tune since the PPL in the UV916 has step's of only 62.5Khz. The UV916 will be computer controled...


Ther's is a nice site with one completed receiver based on this tuner at:

http://hem.passagen.se/communication/uv916rec.html


....this will not be an easy job to do but I will give it a try.... but will take long for sure.

VHF FM receiver with Si570 VFO


Now I have two receivers working in sync with the same VFO, the airband receiver and a VHF FM receiver based on the NE602/MC3361 combination, they have separate antennas but a common audio amplifier.
The MC3361 circuit is based on the one at: http://f6feo.homebuilder.free.fr/RX_LA1185.html
I just replaced the TA7358 front end for an NE602 front end similar to the one on his datasheet. The 10.7 filter is a salvage unit from a chinese store radio.
Unfortunately the squelch is not fully operational and I will have to check again the schematic against the datasheet.

Here working simultaneously with the AM part of the circuit:



As soon as I build the other Si570 kit that arrived probably will place it in another box and not in the airband receiver box. Initialy my idea was to make an coil vfo for the NE602 but since I have the Si570 it will stay more acurate and frequency stable. Tried to replace the discriminator coil for an 455Khz ceramic cristal but didn't worked good, will try one of this days a combination of an commercial inductor and a capacitor since discriminator coils are not the easy thing to get around town. Probably an 360 microH with an 340 Pf capacitor will ressonate at 455Khz.

Friday, October 23, 2009

New IF for the airband receiver


I changed the IF of the airband receiver, now is 10.7Mhz for the first conversion and 455Khz for the last one, that way I can now add an FM 10.7 IF to the circuit, being double conversion on AM an single on FM in order to optimize the Si570 kit (AM airband and FM 144Mhz), probably will make also an front end and IF for 50Mhz ssb.
The circuit is a simple NE602 with an 10.245Mhz cristal and the filter is an 10.7Mhz cristal front the first mixer to the secound mixer, case connected to ground and a paralel capacitor in the secound mixer input (pin 1 on the ne602).